Well, after much anticipation, Edge Products has officially released their Juice with Attitude CS and CTS for the 2013 and 2014 Ram Cummins. Rummors have been flying around the industry about this since the SEMA Show back in November!

The modules are able to work with your factory PCM, so you don’t need to take your PCM out and sent it to them. These work just as all of their other products do. Just a few simple wire connections and pick your power setting!

According to Edge, here are the power increases over stock for each level:

• Level 0: Stock
• Level 1: 25 HP and 70 ft-lbs of Torque
• Level 2: 40 HP and 90 ft-lbs of Torque
• Level 3: 50 HP and 120 ft-lbs of Torque
• Level 4: 65 HP and 160 ft-lbs of Torque
• Level 5: 80 HP and 200 ft-lbs of Torque
• Level 6: Up to 150 HP and 360 ft-lbs of Torque (requires unlock code, additional charges apply)

In addition to adding more power, the CS and CTS is capable of doing the typical tire size recalibration, gear ratio changes, and a host of other performance modifications/adjustments.

Another typical and cool feature of the CS and CTS is the screen interface and the wide range of monitoring/gauge options. To make sure you are able to monitor the important aspects of what is going on, the modules now come with an EGT probe. No longer do you have to buy a separate probe.

To check out the wide range of features and capabilities of the new CS and CTS, make sure to check out Edge Product’s website or keep up to date with their Facebook page.